Pipe Repair in Hickory, NC

A leaking or failing pipe is not something to patch and hope. We repair it properly, and just as important, we tell you honestly when a repair will hold and when replacing the pipe is the smarter money.
Plumbing Hickory, NC repairs water and drain pipe across Hickory and Catawba County, from a single leaking joint to corroded and cracked lines. Upfront pricing and honest advice on repair versus replacement. Call (828) 742-8939.

Signs you need pipe repair

Pipe problems show up in a lot of ways. Call us if you notice:

  • Water stains on walls, ceilings, or floors
  • Damp spots, a musty smell, or mold
  • A drop in water pressure
  • Discolored, rusty, or metallic-tasting water
  • The sound of running water when nothing is on
  • A higher water bill with no change in usage
  • Visible corrosion, rust, or moisture on exposed pipe
  • Frequent leaks in the same area

Catch a pipe problem early and it is often a small repair. Ignore it and it can turn into water damage or a burst pipe.

Common pipe problems we repair

We handle the full range of pipe issues in Hickory homes.

Leaking joints and fittings

Connections loosen and corrode over time. We reseal or replace the joint properly.

Pinhole leaks

Older copper pipe develops tiny pinhole leaks from corrosion, especially with acidic water. One pinhole often means more are coming.

Cracked or damaged pipe

Freeze damage, physical impact, and age crack pipe. We replace the damaged section.

Corroded pipe

Galvanized steel corrodes from the inside, restricting flow and eventually leaking. We repair or, more often, recommend replacing it. See repiping.

Low water pressure

When pressure drops across the house, corroded or partially blocked pipe is a common cause, and we diagnose it.

Drain and waste pipe

We repair leaking and damaged drain lines too, not just supply pipe.

What types of pipe do you work on?

We repair and replace all the common pipe materials found in Hickory homes:

  • Copper, including pinhole leak repair
  • PEX, the flexible modern standard
  • CPVC
  • Galvanized steel, usually a candidate for replacement rather than repeated repair
  • Polybutylene, which we generally recommend replacing rather than patching, because it fails unpredictably
  • Cast iron drain pipe

Trusted by Homeowners & Businesses Across Hickory

trusted on facebook
trusted on yelp
trusted on bbb
trusted on houzz
trusted on trane
5 star rated on google

Should I repair or replace my pipes?

This is the honest question, and the answer depends on the pipe.

  • A single leak in otherwise sound pipe is a straightforward repair.
  • Old galvanized or polybutylene pipe that keeps leaking is usually better replaced, because patching one spot just delays the next failure.
  • If you are repairing leaks again and again, the math favors whole-home repiping.

We will always tell you plainly which situation you are in, so you are not throwing good money after bad on pipe that is at the end of its life.

Why pipes fail in Hickory homes

Local conditions drive a lot of pipe problems, and knowing them helps you plan.

  • Older housing stock. Homes in the historic districts like Oakwood and Kenworth and the mid-century neighborhoods often have galvanized steel or aging copper. Homes from the late 1970s to the mid 1990s may have polybutylene.
  • Acidic well water. On private wells, acidic water corrodes copper from the inside, causing pinhole leaks. See water treatment.
  • Winter freezes. The foothills climate cracks pipe in crawlspaces and exterior walls. See frozen pipe repair.
  • High water pressure. Excess pressure stresses pipe and joints, and a pressure reducing valve protects the system.

Our pipe repair process

01

Locate

We locate the problem, including hidden pipe, using leak detection when needed.

Call (828) 742-8939
02

Identify

We identify the pipe material and the cause.

Call (828) 742-8939
04

Repair

We complete the repair to North Carolina code with the right materials.

Call (828) 742-8939
03

Recommend

We give you an upfront price and an honest repair-versus-replace recommendation.

Call (828) 742-8939
05

Test

We test the line under pressure and confirm the fix holds.

Call (828) 742-8939

What does pipe repair cost in Hickory?

Honest 2026 guidance:

A simple, accessible pipe repair often runs from a couple hundred dollars, depending on the location and the fix.

Pipe hidden in walls, floors, or slabs costs more because of access.

If the real problem is failing pipe throughout the home, repiping is a larger investment that ends the repeat leaks.

Emergency and after-hours service carries an added fee.

You get an upfront price before we start, and financing is available for larger jobs.

Why homeowners choose us for pipe repair

  • We fix the leak and tell you honestly whether the pipe needs replacing
  • The right materials and a code-compliant repair
  • Upfront, honest pricing
  • Licensed, bonded, and insured, working to North Carolina code
  • Local knowledge of the galvanized, polybutylene, and copper issues here

Verify any North Carolina plumbing license at nclicensing.org.

Areas we serve

We repair pipe across Hickory, including Downtown, Viewmont, Oakwood, Kenworth, Lake Hickory, St. Stephens, and Mountain View, plus Newton, Conover, Claremont, Maiden, Longview, Sherrills Ford, Denver, Granite Falls, Lenoir, Morganton, and Taylorsville. See all service areas.
  • “Diagnosed our slab leak fast and fixed it without tearing up the whole floor. Fair price and great communication.”
    Lisa m.
    Claremont, NC
  • “Our toilet kept running and our water bill was climbing. They fixed it same day and saved us money. Solid work.”
    james r.
    Newton, NC
  • Replaced our old galvanized pipes with PEX. Crew was clean, respectful, and finished ahead of schedule. Highly recommend.”
    patricia w.
    Conover, NC
  • “Fast, fair pricing, and they explained everything upfront. No surprises. Will definitely use them again for any plumbing needs.“
    mark t.
    Hickory, NC

Leaking or failing pipe? Let us fix it right.

Get a local plumber who repairs it properly and tells you the truth about repair versus replacement. Call (828) 742-8939 or email info@plumbinghickory.com.

Frequently asked questions

A single leak in otherwise sound pipe is a simple repair. Old galvanized or polybutylene pipe that keeps leaking is usually better replaced, since patching one spot just delays the next failure. If you are repairing leaks repeatedly, repiping is the smarter value. We tell you which fits.

A simple, accessible repair often starts around a couple hundred dollars, while pipe hidden in walls, floors, or slabs costs more due to access. If failing pipe throughout the home is the real issue, repiping is a larger investment. You get an upfront price before we start.

Whole-house low pressure often points to corroded or partially blocked pipe, especially older galvanized steel, though it can also be a pressure regulator or a hidden leak. We diagnose the cause and recommend the right fix.

We can, but we usually recommend replacing polybutylene rather than patching it, because it becomes brittle and fails unpredictably. Repiping ends the cycle of surprise leaks common with this pipe.

Yes. We use leak detection to pinpoint hidden pipe so we open only what is necessary, then repair or replace the damaged section and restore the area.